Specification

• LED Type: Ultra bright CREE XP-G R5 with life span of up to 50,000 hrs.
• Battery: 2x CR123A (3v) / 2x RCR123A (3.7v)
• Function: There are 4 light modes and 3 flashing modes. However, the User Interface (UI) is very cleverly splits the modes, providing Low - Med - High from the side switch and Strobe by holding the side switch down – so you don’t have to cycle through Strobe when selecting a mode, which is good news for Police, Law Enforcement and Tactical users. The 3 hidden modes (Super Low – SOS – Beacon) can be accessed by twisting the head and then clicking the side switch to cycle through the modes. Automatic memory remembers the last function when the torch was last used. This gives instant access to your preferred mode.
• Switch: Unique forward clicky tail switch that is recessed to allow for tail-standing, but is as accessible as a protruding clicky switch due to the tail cap has recesses around the switch. So you get the best of both. There is also a side switch that is recessed into the body, but as easily accessible as a protruding switch. Both switch areas have been thoughtfully designed with multiple users in mind.
• Performance: Highly efficient performance due to the digitally regulated output, which maintains constant brightness.
• Protection: Reverse polarity protection circuit protects against incorrect insertion of batteries. Sealed with O-rings for excellent water resistance and improved service life. Waterproof and Dust Resistant to IPX-8.
• Tactical: Strike bezel at the front and a tactical. The body has been designed to allow multiple tactical grips. The reversible/ removable clip allows the torch to be clipped onto webbing, a tactical vest or Police stab vest.
• Dimension: 125mm (Length), 25.3mm (Head), 21.5mm (Body)
• Weight: 59g (without battery).
• Finish: Tough, sealed body with HA Type III anodising.
• Reflector: Orange peel to provide a smooth, flawless beam.
• Lens: Toughened, ultra clear glass
• Switch: Tail forward clicky switch for On/ Momentary On/ Off. Side switch for mode selection and strobe (press and hold the side switch). Rotate the head to access hidden modes (Super Low-SOS-Beacon).

What you get

Printed Klarus packaging containing:

• Klarus NT20 Tactical Flashlight
• Removable and reversible clip
• Klarus heavy duty holster with belt loop and D-ring
• Wrist lanyard
• Spare O-rings
• Spare rubber switch boot
• User Manual with 24 Month Warranty
• 2x CR123A Batteries FREE

Operation

• Turn Power On/ Off
  Pressing the tail cap switch will turn power On/ Off
• Switch Modes
  Half press tail switch for momentary-on. When light is on, press the side switch to cycle through Low-Med-High modes. Strobe is accessed by holding down the side switch. Hidden modes (Super Low-SOS-Beacon) can be accessed by twisting the torch head slightly and then using the side switch to cycle through the modes. The Klarus UI is one of the best and most considered UIs we have used.
• Memory Function
  When the torch is on, select preferred mode and click off with tail switch. The torch will remember the last mode when next switched on.

Output & Runtimes

Based on 2x CR123A Batteries:

1. Low Mode: 9 Lumens (52 hrs)
2. Medium Mode: 135 Lumens (4.1 hrs)
3. High Mode: 280 Lumens (1.5 hrs)
4. Strobe Mode: 280 Lumens (3 hrs)

Hidden Modes:

• Super Low Mode: 2 Lumens (200 hrs)
• SOS Mode: 135 Lumens (11.5 hrs)
• Beacon Mode: 135 Lumens (60 hrs)